网路功能路由交换方向-毕业论文.docVIP

PAGE 专科生毕业设计 网 络 工 程 路由交换方向 摘 要 随着Internet的普及，网络技术的飞速发展,网络设计的方法不停地更新和淘汰，中国正在努力把计算机网络发展成第三生产力，而实现这个目标的关键就是要实现企业信息化，企业信息化生产管理可以把计算机网络变成给国家创造效益的生产工具。一个优秀的计算机网络设计，能给信息化的企业带来一个高效的生产工具。既然计算机网络成了生产工具，那么本课题完成的结果就直接关系到了工厂的生产成本和生产效率，所以本毕业论文在网络设计中要强调的三个方面是性价比、稳定性和可复用性。 本论文以计算机网络技术为基本理论基础，设计的原则是先做好物理架构，以后逐步添加设备。所以对物理层，就是布线的设计需要一步到位。本课题的研究成果将具有较好的开放型，可以推广应用于所有类似的企业信息化系统。当然不同的客户需求会有不同的网络设计结果。论文从网络设计的方法论角度出发，通过工厂计算机网络这个案例研究可以推导出网络设计的标准化模式，论文对于中型计算机网络设计的规范化有良好的促进作用。 关键词：网络结构；布线设计；需求分析；网络配置；网络安全；网络拓扑 ABSTRACT With the popularity of Internet, network technology rapid development, web design method constantly updated and knocked out, China is working hard to put the computer network development into the third productivity, and the key to achieve this goal is to achieve enterprise informatization, the enterprise information production management can put the computer network into the country to create benefit production tools. A good computer network design, can give information enterprise to bring a more efficient manufacturing tools. Since the computer network became production tools, then this topic completed the result is directly related to factory production costs and production efficiency, so this dissertation in network design should be emphasized in the three aspects are cost-effective, stability and reusability. In this paper the basic theory of computer network technology as the foundation, design principle is to make a physical structure, and then gradually add equipment. So for the physical, the design needs one pace reachs the designated position is wiring. This topic research results will have good open model, which can be applied to all similar enterprise information system. Of course different customer demand will have different network design results. From network design methodology papers Angle, through the factory computer network this case study can deduce that the standardization of the network design, the paper for medium model of computer network desi