ABB-AquaMaster 3 电磁流量计编程指南 用户手册.pdf

Programming Guide COI/FET2XX–EN Rev. C AquaMaster 3 Electromagnetic flowmeter The smart solution for remote applications Introduction AquaMaster 3TM is a range of high performance This Programming Guide should be used in conjunction electromagnetic flowmeters for the measurement of with the following publications: electrically-conductive fluids and is normally supplied as – MODBUS Tables Supplement factory-configured, calibrated systems. (COI/FET2XX/MOD/TBL–EN) When the meter is taken out of storage and installed for – User Guide (OI/FET2XX–EN) first use, remove the protective label (if fitted) from the front to enable light to activate the unit. If the meter is not powered, connect any batteries or external supply as detailed in the User Guide (OI/FET2XX–EN). The Company We are an established world force in the design and manufacture of instrumentation for industrial process control, flow measurement, gas and liquid analysis and environmental applications. As a part of ABB, a world leader in process automation technology, we offer customers application expertise, service and support worldwide. We are committed to teamwork, high quality manufacturing, advanced technology and unrivalled service and support. The quality, accuracy and performance of the Company’s products result from over 100 years experience, combined with a continuous program of innovative design and development to incorporate the latest technology. Quality Control The UKAS Calibration Laboratory No. 0255 is just one of the ten flow calibration plants operated by the Company and is indicative of our dedication to quality and accuracy. UKAS Calibration Laboratory No. 0255 AquaMaster 3 Electromagnetic flowmeter