常用芯片的数据手册fan.pdfVIP

FAN7680 PC Power Supply Outputs Monitoring IC Features Description ï PC Power Supply Output Monitor Circuitry The FAN7680 is a complete output supervisory circuitry ï Few External Components intended for use in the secondary side of a switched mode ï Over Voltage for 3.3V, 5V and 12V(Vcc) power supply. It provides over voltage (OVP), Outputs under voltage (UVP), fault output ï Under Voltage for 3.3V, 5V and 12V(Vcc) (FPO), remote On/Off (PSON), latch, internal delay circuits Outputs with Delay Time and power good signal generator to monitor and control the ï Fault Output with Open Drain Output output of the switching power supply system. As for output ï Open Drain Power Good Output control, power good output(PGO) and fault out- ï 300ms Power Good Delay put(FPO) are included. It directly senses all the output rails ï 38ms PSON On/Off Debounce for OVP and UVP without external dividers. The FAN7680 ï 73us Debounce offers a simple and cost effective solution with minimum ï 2.3ms PSON to FPO Turn Off Delay number of external components and greatly reduces PCB ï Latch Function Controlled by PSON and board space for power supply. Inputs 8-DIP Typical Application