ftserver详细课程05网卡绑定.pptxVIP

以太网卡绑定Bonding6Ethernet Channel BondingTwo or more physical Ethernet ports are partnered to provide a single fault-tolerant path to the networkEthernet PCIe adapters may be embedded in the CPU-I/O enclosure or be separately installed PCIe cardsOnly teams with Ethernet PCIe adapters in different CPU-I/O enclosures are listed as duplexed in the display output by the ftsmaint ls command and have a steady white PCIe-slot status LED.Ethernet Channel Bonding (Continued)Network device names are based on their physical location in systemUses standard Linux channel-bonding interface to pair physical interfaces for redundancyDefault configuration is mode 1 (one adapter is active, second adapter is stand-by) with Dynamic Host Configuration Protocol (DHCP) enabledMAC AddressesEach physical adapter has its own MAC addressOne base MAC address is assigned to system as a wholeMAC addresses for other devices are derived algorithmically from the base MAC addressWhat MAC address is used for a bond interface?Initially nullTaken from first physical interface in bondSets MAC address of other physical interfaces in bondSlots for Ethernet Adapters*High-profile slots are standard in 6400 systems and optional in 4700 systems.1 - Slot 3, high-profile*, I/O-102 - Slot 4, high-profile*, I/O-10 3 - Slot 1, low-profile, I/O-104 - Slot 2, low-profile, I/O-105 - Slot 3, high-profile*, I/O-116 - Slot 4, high-profile*, I/O-11 7 - Slot 1, low-profile, I/O-118 - Slot 2, low-profile, I/O-11PCIe Ethernet adapters can reside in the slots shown below.Embedded Ethernet Adapter PortsPhysical LocationName Top CPU-0, I/O-10, slot 6, port 0 eth100600Top CPU-0, I/O-10, slot 6, port 1eth100601Bottom CPU-1, I/O-11, slot 6, port 0 eth110600Bottom CPU-1, I/O-11, slot 6, port 1 eth110601Top CPU-0, I/O-10, slot 12, port 0 eth101200Top CPU-0, I/O-10, slot 12, port 1eth101201Bottom CPU-1, I/O-11, slot 12, port 0 eth111200Bottom CPU-1, I/O-11, slot 12, port 1 eth111201Note: Because ftServer system configurations can chang