公司车辆使用管理制度.docVIP

公司车辆使用管理制度 1、目的 为规范公司车辆管理～合理调度和有效使用车辆～节约交通费用开支～特制定本办法。 2、适用范围 本制度适用于由公司管理的所有车辆。 3、主要职责 3.1 行政部全面负责公司车辆调度、协调和管理工作。 3.2 车辆使用部门按照车辆使用和管理办法规定填写派车单。 3.3 行政部司机负责车辆平安到达目的地与返回～所管辖车辆的日常保养和清洁工作。 4、车辆的使用管理 4.1 车辆使用范围 4.1.1 公司员工外出公差～包括:洽谈业务、开会/学习、维修设备、采购物品等。 4.1.2 接送公司宾客和来公司办事人员。 4.1.3 其他紧急和特殊用车～例如:员工受伤急需治疗、外单位借调用车等。 4.2 车辆使用程序 good processing performance, with sufficient rigidity. Template selected template surface should be flat and smooth, plywood coated high strength, good wear resistance, water resistance, durability, physical and chemical properties of stable and smooth surface, no pollution, no damage, clean. Template straight keel, specifications, and panels close, firmly attached, have sufficient rigidity. Templates may not play the ink, paint and write numbers to avoid contamination of concrete surfaces. Template design set of bolt holes through walls, but not free to play holes, openings, portrayal, nailing. Release agent used on concrete surface quality and color does not affect the release agent. Pull bolt specifications and varieties should be according to the concrete lateral pressure, wall waterproofing, air defence requirements and template Panel selection, bolts used should have sufficient strength to pull the bolt casing and plug should be determined according to the diameter of the bolt, the choice of plastics, rubber, nylon and other materials. Topstitching cross-section according to the circumstances, the request can tear down, should adopt the trapezoid, square, rounded square; can be made for hardwood, nylon, plastic, aluminum, stainless steel and other materials. Depth is not greater than 20mm. Steel frame in front of the Assembly must be straightened, wood joist requires that you have sufficient rigidity. Keel as far as possible without joints, if it proves necessary to connect, the connection must be staggered. Template processing must be carried out in wood processing plant, processing materials when cutting line cutting, precise size,