[通信标准] OSFP MSA4.0发布.pdfVIP

This specification is available from OSFP MSA Specification for OSFP OCTAL SMALL FORM FACTOR PLUGGABLE MODULE Rev 4 .0 May 28th , 2021 Abstract: This specification defines the electrical connectors, electrical signals and power supplies, mechanical and thermal requirements of the OSFP Module, connector and cage systems. The OSFP Management interface is described in a separate document, Common Management Interface Specification for 8/16X Pluggable Transceivers. This document provides a common specification for systems manufacturers, system integrators, and suppliers of modules. Points of Contact: Editor Brian Park bpark@arista dot com Associate Editor Warren Meggitt wmeggitt@arista dot com Chair Andreas Bechtolsheim avb@arista dot com Co-Chair Chris Cole chris.cole@ii-vi dot com Co-Chair Brian Kirk brian.kirk@amphenol-tcs dot com Limitations on the Use of this Information: This specification is provided “AS IS” with no warranties whatsoever, including any warranty of merchantability, non-infringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification or sample. The authors disclaim all liability, including liability for infringement of any proprietary rights, relating to use of information in this specification. In no event shall the OSFP MSA participants be liable for any direct, indirect, special, exemplary, punitive, or consequential damages, including, without limitation, lost profits, even if advised of the possibility of such damages. This specification may contain or require the use of intellectual property owned by others. No license, express or impl