56-CCP功率柜指示面板AF D242 A20说明书.pdfVIP

ABB Switzerland Ltd. UNITROL 6000 PEC80-SCP / PEC80-CCP Type AF D242A Programming instruction 3BHS023126 E23 Page No. 1 of 16 6/4/2009 ABB Switzerland Ltd NOTICE The information in this document is subject to change without notice and should not be construed, as a commitment by ABB Switzerland Ltd. ABB Switzerland Ltd assumes no responsibility for any errors that may appear in this document. In no event shall ABB Switzerland Ltd be liable for direct, indirect, special, incidental, or consequential damages of any nature or kind arising from the use of this document, nor shall ABB Switzerland Ltd be liable for incidental or consequential damages arising from use of any software or hardware described in this document. This document and parts thereof must not be reproduced or copied without ABB Switzerland Ltd’s written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. TRADEMARKS 3BHS023126 E23 Page No. 2 of 16 6/4/2009 ABB Switzerland Ltd CHAPTER 1 INTRODUCTION4 1.1 Overview 4 CHAPTER 2 PROGRAMMING INSTRUCTION5 2.1 Check the panel version 5 2.2 Program the panel 6 2.3 Add the