plustek精益底片 照片扫描仪OpticFilm 8100 OpticFilm 8100 快速安装指南.pdf

OpticFilm series Quick Start Guide 1 Unpack and Connect Place Film in the Holder Scan me -- Installation Tutorial video * 35 mm IT-8 Target (Only for OF8200i Ai) If you are installing the software without a CD/DVD drive, please refer to For Mac/PC without a CD/DVD drive section on the rear side of this guide. 2 Install Software Insert the product CD and run your product’s software package. * You do not have to install any scanner drivers when installing the scanner under Mac OS. The scanner drivers are already included within the SilverFast installation. 3 Unlock SilverFast 1. Check Image Source and Language Selection, then click Start. 2. Enter your First name, Last name, and the Serial number, then click Unlock. * The SilverFast DVD-ROM should remain in the DVD-ROM drive for the Unlock process. If the Image Source is blank, please check if your scanner is The SilverFast serial number is located on the front of the SilverFast Attention properly listed under [Imaging Devices] in [Device Manager].