哈希HACH-Polymetron NA9600 sc 钠离子分析仪-钠表 操作手册-操作说明书.pdf

DOC023.97.80594 Polymetron NA9600 sc Na+ 11/2018, Edition 1 Operations 操作 English3 中文 30 2 Table of contents Startup on page 3 Configure the relays on page 15 User interface and navigation on page 5 Set the error hold mode on page 21 Set the language on page 8 Set the security settings on page 21 Remove channels from the measurement screen (2- or Adjust the water level of the overflow vessel 4-channel analyzers) on page 8 on page 21 Set the display brightness on page 9 Set the auto calibration settings on page 22 Set the maximum rinsing time on page 9 Do a calibration on page 22 Set the sample target pH (analyzer without cationic Show the calibration data on page 24 pump) on page 9 Set the sample target pH (analyzer with cationic pump) Do a calibration verification on page 24 on page 9 Set the measurement logging interval (1-channel Do a temperature calibration on page 24 analyzers) on page 10 Set the measurement logging interval (2- or 4-channel Do a flow rate calibration on page 24 analyzers) on page 11 Set the reactivation schedule on page 12 Calibrate the 4-20 mA analog outputs on page 25 Set the measurement units on page 12 Show the details of the current and the last measurement on page 25 Set the signal average on page 12 Measure a grab sample on page 26 Change the analyzer or channel names on page 12 Show the measurement, calibration and event logs