哈希HACH-Polymetron 9125电导率-电阻率检测系统 操作手册-操作说明书.pdf

Operator Manual POLYMETRON 9125 Conductivity/resistivity measurement 221=191=025 - Revision L - 23/02/2007 Transmitter 9125 – Conductivity / resistivity measurement This instrument conforms to the European Directives: - 89/336/CEE modified by the directive 93/68/CEE - 73/23/CEE modified by the directive 93/68/CEE Warning ! There are no user-serviceable parts in either the transmitter or sensor. Only Hach Ultra Analytics personnel or their authorized representative should attempt repair of the system and only components expressly approved by the manufacturer should be used. Any attempt to repair the instrument in contradiction of these guidelines may result in damage to the instrument and injury to the person making the repair. It will also void the warranty and may compromise the safe operation, electrical integrity or CE compliance of the instrument. Hach Ultra Analytics Dr. Bruno Lange GmbH Co. KG 6 route de Compois – CP212 Königsweg 10 - D- 14163 Berlin CH-1222 Vesenaz Geneva Postfach 37 03 63 . D-14133 Berlin Tél. + 41 22 855 91 00 Telefon 030 - 809 86 - 369 Fax + 41 22 855 91 99 Telefax 030 - 809 86 - 283 Note: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause har