资料讲义分析ia hott2014io link.pptVIP

1 IA HOTT 2014 IO-Link 2 Agenda IO-Link Consortium POINT IO-Link Master IO-Link Concept IO-Link System Architecture What is IO-Link? What is IO-Link? IO-Link is a worldwide standardized IO technology (IEC 61131-9) for communication with sensors and actuators IO-Link is NOT a fieldbus but an enhanced development of the current connection technology of sensors and actuators An IO‐Link system consists of an IO‐Link master and IO‐Link devices ‐ often sensors, actuators or combinations thereof Standard 3‐wire sensor/actuator cable enables the point-to-point communication with the sensor or actuator connection without any additional requirements to the cable material. 3 IO-Link Consortium 4 IO-Link was developed primarily by sensor companies. IO-Link System Architecture 5 EtherNet/IP Communication IP20 IO-Link Master module IO-Link device IP67 IO-Link Master module IO-Link device IO-Link Concept Simplified installation One interface for all information Replacement of analogue signals Simplified Device Integration via IO Data Description (IODD) File Similar to ODVA EDS file Consistent Engineering tools Configuration of IO-Link module and devices via Add-On-Profile in Studio5000 Application Specific Name – Sensors contain unique text string for identification I/O Tag names automatically created based on IODD File Advanced Diagnostics Easily accessed information from Sensor/Actuator level 6 IO-Link Concept Scalable Diagnostics Descriptive tags make programming and access to device diagnostics very simple Information available on demand Increase Efficiency Parameter change during operation Decrease in maintenance costs Preventative maintenance versus unexpected shutdowns 7 POINT IO-LINK Master Module – 1734-4IOL Enables connection of up to 4 IO-Link devices or standard I/Os Parameterization of IO-Link devices are handled via Add-On-Profile IO wiring topologies between existing POINT terminal and IO-Link devices are maintained Supported by all POINT EtherNet/IP adapters