RS Components 电工电料 控制继电器 K8AK-AW1 24VAC DC 使用说明.pdfVIP

NEW Product Single-phase Overcurrent/Undercurrent Relay K8AK-AW Ideal for Current Monitoring for Industrial Facilities and Equipment. • Monitor for overcurrents and undercurrents simultaneously. Separate settings and outputs supported for overcurrents and undercurrents. • Use commercially available CTs (CT current on secondary side: 0 to 1 A or 0 to 5 A). • Manual resetting and automatically resetting supported by one Relay. • Startup lock and operating time can be set separately. • Two sets of SPDT output contacts, 5 A at 250 VAC (resistive load). • Output status can be monitored using LED indicator. • Inputs are isolated from the power supply. Refer to Safety Precautions on page 11. For the most recent information on models that have been certified for Refer to page 10 for commonly asked questions. safety standards, refer to your OMRON website. Ordering Information List of Models Setting range Power supply voltage Model 2 to 20 mA AC/DC 24 VAC/DC K8AK-AW1 24 VAC/DC 10 to 100 mA AC/DC 50 to 500 mA AC/DC 100 to 240 VAC K8AK-AW1 100-240 VAC 24 VAC/DC K8AK-AW2 24 VAC/DC 0.1 to 1 A AC/DC 0.5 to 5 A AC/DC 100 to 240 VAC K8AK-AW2 100-240 VAC 24 VAC/DC K8AK-AW3 24 VAC/DC 10 to 100 A AC* 20 to 200 A AC* 100 to 240 VAC K8AK-AW3 100-240 VAC * The K8AK-AW3 is designed to be used in combination with an OMRON K8AC-CT200L Current Transformer (CT). (Direct input is not possible.) Accessory (Order Separately) ●OMRON CT ●Commercially Available CTs* Applicable