RS Components 其他网络设备 物理层收发器 KSZ9031RNXCC 使用说明.pdfVIP

KSZ9031RNX Gigabit Ethernet Transceiver with RGMII Support Features • Single-Chip 10/100/1000 Mbps Ethernet Trans- • Operating Voltages ceiver Suitable for IEEE 802.3 Applications - Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V • RGMII Timing Supports On-Chip Delay According (External FET or Regulator) to RGMII Version 2.0, with Programming Options - VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V for External Delay and Making Adjustments and - Transceiver (AVDDH): 3.3V or 2.5V (Com- Corrections to TX and RX Timing Paths mercial Temp.) • RGMII with 3.3V/2.5V/1.8V Tolerant I/Os • AEC-Q100 Grade 3 (KSZ9031RNXUA/UB) and • Auto-Negotiation to Automatically Select the Grade 2 (KSZ9031RNXVA/VB) Qualified for Auto- Highest Link-Up Speed (10/100/1000 Mbps) and motive Applications Duplex (Half/Full) • 48-pin QFN (7 mm × 7 mm) Package • On-Chip Termination Resistors for the Differential Pairs Target Applications • On-Chip LDO Controller to Support Single 3.3V Supply Operation – Requires Only One External • Laser/Network Printer FET to Generate 1.2V for the Core • Network Attached Storage (NAS) • Jumbo Frame Support up to 16 KB • Network Server • 125 MHz Reference Clock Output • Gigabit LAN on Motherboard (GLOM) • Energy Detect Power-Down Mode for Reduced • Broadband Gateway Power Consumption When the Cable is Not