RS Components 其他网络设备 多路器开关芯片 PCA9540BDP,118 使用说明.pdfVIP

PCA9540B 2 2-channel I C-bus multiplexer Rev. 6 — 5 May 2014 Product data sheet 1. General description 2 The PCA9540B is a 1-of-2 bidirectional translating multiplexer, controlled via the I C-bus. The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels. Only one SCx/SDx channel is selected at a time, determined by the contents of the programmable control register. A power-on reset function puts the registers in their default state and initializes the I2C-bus state machine with no channels selected. The pass gates of the multiplexer are constructed such that the VDD pin can be used to limit the maximum high voltage that is passed by the PCA9540B. This allows the use of different bus voltages on each SCx/SDx pair, so that 1.8 V, 2.5 V or 3.3 V parts can communicate with 5 V parts without any additional protection. External pull-up resistors can pull the bus up to the desired voltage level for this channel. All I/O pins are 5 V tolerant. 2. Features and benefits  1-of-2 bidirectional translating multiplexer  I2C-bus interface logic; compatible with SMBus standards  Channel selection via I2C-bus  Power-up with all multiplexer channels deselected  Low Ron switches  Allows voltage level translat