RS Components 其他网络设备 电缆收发器 MC10EL89DG 使用说明.pdfVIP

MC10EL89 5V ECL Coaxial Cable Driver Description The MC10EL89 is a differential fanout gate specifically designed to drive coaxial cables. The device is especially useful in Digital Video Broadcasting applications; for this application, since the system is polarity free, each output can be used as an independent driver. The driver boasts a gain of approximately 40 and produces output swings twice as large as a standard ECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize 8 signal loss. The 1.6 V output swings allow for termination at both ends 1 of the cable, while maintaining the required 800 mV swing at the SOIC−8 NB receiving end of the cable. Because of the larger output swings, the D SUFFIX device cannot be terminated into the standard −2.0 V. All of the DC CASE 751−07 parameters are tested with a 50 to −3.0 V load. The driver accepts a standard differential ECL input and can run off of the Digital Video Broadcast standard −5.0 V supply. MARKING DIAGRAMS* Features • 375 ps Propagation Delay 8 HEL89 • 1.6 V Output Swings ALYW • PECL Mode Operating Range: ♦ VCC = 4.2 V to 5.7 V with VEE = 0 V 1 • NECL Mode Operating