Roland罗兰乐器TD-12 鼓音源TD-12 TurboStart支持文档.pdf

®ÂØÒňΠTD-12 TurboStart Percussion Sound MoDule Welcome Playing the Patterns Congratulations on your purchase of the Roland There are 150 preset patterns in the TD-12’s TD-12. This TurboStart contains step-by-step sequencer. Use the follow ing steps to select and play instructions that w ill quickly introduce you to a few of them: the TD-12’s major features . 1. Press PATTERN so it’s lit. Note: This TurboStart discusses the use of the TD- 12 2. Turn the VALUE dial to select one of the preset as part of the Roland V-Stage Series TD- 12S. patterns. 3. Press PLAY. Selecting and Auditioning Drum Kits 4. Press STOP when you’re finished. Note: If you select a TAP pattern, press the PLA Y There are 50 drum kits in the TD-12, ready to go. Use button repeatedly to move, or “tap,” through the the following steps to select and try out a few : pattern. Tap patterns are identified by “  | |” 1. Press KIT so it’s lit. shown below the “P” in the display . 2. Turn the VALUE dial or press the +/- buttons to select 19 UNIVERSE. 3. Play the pads—try performing some rim shots Pattern Recording with the toms. You can use any of the 100 user pattern locations in 4. Now turn the VALUE dial clockwise