Roland罗兰乐器VK-8M 风琴音色音源VK-8M TurboStart支持文档.pdf

® ®ÂØÒňΠVK-8M Organ Sound Module Welcome Adding Vibrato or Chorus Congratulations on your purchase of the Roland VK-8M. This TurboStart contains step-by- Use the following procedure to add vibrato or chorus to the current sound. step instructions that will quickly introduce you the VK-8M’s major features. Note: Vibrato or chorus cannot be applied to percussion sounds. Playing the Demo Songs 1 Press the button beneath VIBRATO AND CHORUS so it’s lit. 2 Turn the VIBRATO AND CHORUS knob to select the desired type of vibrato or the Use the following procedure to play the four demonstration (demo) songs in the desired type of chorus: V1, V2, V3, C1, C2, or C3. VK-8M: Note: Vibrato and chorus cannot be applied together. 1 Simultaneously press the H-BAR PART and H-BAR MANUAL buttons. 2 Press any of the REGISTRATION 1-4 buttons to listen to one of the four demo songs. Changing the Amp Type 3 Press the H-BAR PART button again to exit Demo mode.