RS Components 其他网络设备 电机驱动芯片 LB1930EMC-AH 使用说明.pdfVIP

Ordering number : ENA2018A LB1930MC Monolithic Digital IC Low-Voltage, Low-Saturation Bidirectional Motor Driver Overview The LB1930MC is single-channel forward/reverse DC brush motor driver. This device is optimal for CD, DVD and Blue Ray Disk player loading motors. And it is possible to use it for others as a general-purpose product. Features • The low saturation voltage reduces IC internal heating and allows a high voltage to be applied to the motor. Thus this device can be used even in environments with a high operating ambient temperature. Output saturation voltage: Vsat1 = 0.25V typical (IO = 0.2A) (High side + low side): Vsat2 = 0.55V typical (IO = 0.5A) Operating temperature range: Ta = -30 to +85°C • The LB1930MC features the wide operating voltage range of 2.2 to 10.8V and the low standby current drain of 0.1μA, and therefore can easily be used in battery operated systems. • To minimize through currents, the LB1930MC internal logic passes through an internal standby state when switched by the input signals between forward/reverse and brake, or between forward and reverse. • There are no constraints on the relationship between the input voltage and the supply voltage. For example, the LB1930MC can be used with VCC = 3V, and VIN = 5V. • If the IC chip exceeds 180°C due to an output short causing a large current flow, the built-in thermal protection circuit suppresses the drive current to prevent fires or destruction of the IC. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Supply voltage VCC max