RS Components 其他网络设备 通用驱动器 MAX32000CCB+ 使用说明.pdfVIP

Click here for production status of specific part numbers. MAX32000 High-Speed Quad Driver with Integrated DACs, Cable-Droop Compensation, Slew-Rate Control, and VHH Fourth-Level Drive General Description Benefits and Features The MAX32000 is a fully integrated, quad-channel, ● Low Power at High-Speed Maximizes Driver high-performance pin-electronics driver with built-in level- Performance setting DACs, ideal for memory and SOC ATE systems. • 700mW per Channel Each MAX32000 channel includes a four-level pin driver, • 2.57Gbps at +1V Programmed programmable cable-droop compensation, five 14-bit • 280ps Typical Rise/Fall Times at +2V (20% to 80%) DACs, and a comparator that is useful for AC calibration. • Very Low Timing Dispersion at 50ps Typical The driver features a wide -2V to +6V operating range • Wide Voltage Range from -2V to +6V and a data rate of 1200Mbps at +2V operation, and in • Integrated VHH Programming Mode (4th-Level high-voltage mode (VHH mode) offers an output voltage Drive) up to 13V • 100nA Low-Leak Mode range of 0 to 13V. The device includes high impedance, active termination (3rd-level drive), and is highly linear ● Integrated Functionality Provides Value-Added Features even at low voltage swings. The calibration comparators • Programmable Double Time Constant Cable-Droop and multiplexer provide a timing calibration path for each Compensation channel. A serial interface configures the device, easing • Digital