蓝牙 和 MSP430 音频信宿参考设计测试数据.pdfVIP

Quick Start Guide TIDU178– November 2013 Bluetooth and MSP430 ™ Audio Reference Design Quick Start Guide ABSTRACT This document will help you quickly get started on CC256x Audio Sink demo and make this a smooth out- of-the-box experience. NOTE: This demo utilizes new audio features of the CC256xB dual mode Bluetooth controller, a new ROM spin of the CC256xA device. Apart from the device label, you can verify the correct part number by making sure the LMP subversion for CC256xB is 0x1B90 (instead of 0x1B0F for CC256xA) by issuing the HCI_Read_Local_Version_Information standard HCI command before loading the Service Pack. 1 Out of the Box Demo 1. Plug in the USB cable to the USB connector (J4). Toggle switch 2 to the ON position to power up the board. NOTE: The board also has power options using alkaline batteries or rechargeable batteries. 2. Make sure speakers are connected to J25. The recommended speaker can be purchased at /, part number: B008BYXU72. 3. Go to the Bluetooth settings on the phone. Pair and connect to the device called Headset or CC256x A3DP. If you are asked for the passcode , type in 0000. It should then say Connected under Bluetooth Devices. NOTE: If having trouble reconnecting after being previously paired to the device, try to disconnect and then reconnect. 4. Play some songs and hear the music on the sp