WINCC01参考文档资料.pdfVIP

QUESTION: How can I set up a PROFIBUS FMS connection between WinCC and a KlöcknerMöller controller? ANSWER: On the WinCC computer you must use ComProfibus to create an *.ldb file. Pay attention here to the data for the KlöcknerMöller controller. In this c ase it is only possible to set up an acyclic connection to WinCC. With respect to the KlöcknerMöller control, this leaves only 2 options open to parameterize a connection. In the example here we have selected the CR 4 from the KlöcknerMöller data. Set the following in ComProfibus: ComProfibus FMS M