Panasonic松下 焊接电源YD-500CL5HJE说明书.pdfVIP

Operating Instructions Thyristor Controlled MIG/MAG Arc Welding Power Source Model No. YD-500CL ●Thankyouforyour purchase of Panasonicwelding powersource. ●Before operating this product, please read the instructions carefully and save this manualforfuture use.First of all, please read “Safety precautions” or “Safety manual”. ●SPEC.No.：YD-500CL5HJE Panasonic Welding Systems (Tangshan) Co., Ltd. TSM85148-05 PRODUCTFEATURES  Specialized inthe Shipbuilding and Large steel construction.  With no control cable,cable disconnection breakdownwiththe machine has diminished considerably incontrary to frequent control cable disconnection breakdownwith conventional machines  Thanks to PWST’s instant self-protectiontechnology, power source andwire feeder PC Boards can be protected once short-circuit happened alongwave-carrier cable.  Withthe self-recovery function,aftershort-circuit removed, machinewill resume to work automatically.  New dustproof design enables machine suitable forevery kind of operation conditions.  Onthe occasionof frequent changes onwelding parameters,three sets of welding currents and voltages are able to be preset at hand according to three kinds of conditions like plat,vertical,overhead positionwelding.  Strong,dustproof and dampproof wire feeding systemYW-50CA2HAV Explanationofthemajorfunctions: 1. self-protectionand self-recovery function When short-circuit happened along wave-carrier cable, welding machine would be automatically turned into protection mode asfollowing:  All output inclusive of welding voltage, power supply for the wire feed system would be cut off by powersource automatically.  The indicatoronfront panelof powersourcewould be lit.  The power lamponthewire feederwould be lit off.