Panasonic松下 焊接电源YC-500WY4HN5说明书（英文）.pdf

Operating Instructions IGBT controlled AC/DC TIG arc welding power source Model No. YC-500WY ● Thank you for your purchase of Panasonic welding power source. ● Before operating this product, please read the instructions carefully and save this manual for future use. First of all, please read “Safety precautions” or “Safety manual”. ● SPEC. No. ： YC-500WY4HGE Panasonic Welding Systems (Tangshan) Co., Ltd. TSM81245-04 NOTICE: MACHINE EXPORT TO EUROPE This product does not meet the requirements specified in the EC Directives which are the EU safety ordinance. Please bear in mind that this product may not be brought as is into the EU. The same restriction also applies to any country which has signed the EEA accord. Please be absolutely sure to consult with us before attempting to relocate or resell this product to or in any EU member state or any other country which has signed the EEA accord. 1.Safety Precaution Read this manual carefully to use the machine properly. The cautions mentioned in this manual are important to operate the machine properly and prevent hazardous situation and damage to you and other personnel. This manual is also structured on the premise that any personnel who handle industrial robots must complete the appropriate training programs, which can be a requirement of related regulations and standards. Some safety precautions are emphasized using the following symbols for extra caution. Warnings, Cautions, Mandatory Actions and Prohibitions listed in this manual must be followed without fail. If directions are not followed carefully, potentials for personal inj