Panasonic松下 焊接电源YD-500GL4HJE说明书（英文）.pdf

Digital IGBT Controlled MIG/MAG Arc Welding Power Source Operating Instructions Model No. YD-500GL4HV Thank you for your purchase of Panasonic welding power source. Before operating this product, please read the instructions carefully and save this manual for future use. SPEC. No: YD-500GL4HJE TSM50541-03 ■ Caution for your safety Read and understand this manual before installing, This equipment and instructions are for use only by operating or servicing this product. persons trained and experienced in the safety operation of welding equipment. Do not allow The wiring and grounding should be done by untrained persons to install, operate, or maintain this educated and/or skilled person. equipment. ■ Cautions about electromagnetic disturbance ● Extra precaution may be required when welding ● The user shall be observe to reduce emission power source is used in a domestic establishment. disturbance as below. ● Before installing welding equipment ,the user shall a) Welding equipment should be connected to make an assessment of potential mains supply according to the manufacture’s Electromagnetic problems in the surrounding area recommendations. as below. b) Welding equipment should be routinely a) O