内容文稿msc.patran courses课程.pptxVIP

WORKSHOP 1RIGID BALL PENETRATIONIn this example we’ll learn the following:1 - How to define an Adaptive Contact (used for Material erosion, penetration and perforation problems.2 - How to Define RIGID Material Model and elastoplastic MAT24 Material Model3 - How to Define a Material Failure4 - How to Post-Process the Model with failed elements using post-processor LSPOST. Plate Properties Density = 7850 kg/m3 Elastic Modulus (E) = 2E11 N/m2 Poisson ratio = 0.3 Yield Stress = 4E8 N/m2 Max. Plastic Strain = 50% Plate Thickness = 0.005 m Plate Dimension = 0.3 X 0.3 m Rigid Ball Properties Density = 112626 kg/m3 Elastic Modulus (E) = 2E11 N/m2 Poisson ratio = 0.3 Impact Velocity = 230 m/sec Ball Radius = 0.043 mSimulation Time = 0.8 msStep 1. Files: Create a New DatabaseabOpen new database and name it ball_adaptive.Open File Menu and click New.Type ball_adaptive under File name and click OK.Select MSC.Nastran for Analysis Code.Select Explicit Nonlinear for Analysis Type and click OK cdStep 2. Geometry: Create / Point / XYZ afdbgechijCreate Rigid Ball GeometriesGeometry: Create / Point / XYZEnter [0 0 0] for Point Coordinates ListClick ApplyEnter [0.043 0 0] for Point Coordinates ListClick ApplyGeometry: Create / Curve / RevolveEnter Coord 0.3 for AxisEnter 90 for Total AngleEnter Point 2 for Point ListClick ApplyStep 3. Geometry: Create / Surface / RevolveabcdeCreate Surface 1 by Revolving Curve 1Geometry: Create / Surface / RevolveEnter Coord 0.2 for AxisEnter 90 for Total AngleSelect Curve 1 for Curve ListClick ApplyStep 3. Geometry: Create / Surface / RevolveadbfcegSimilarly, repeat previous process three times to create the Surfaces for the top half of of the Rigid BallGeometry: Create / Surface / RevolveEnter Surface 1.2 for Curve ListClick ApplyEnter Surface 2.2 for Curve ListClick ApplyEnter Surface 3.2 for Curve ListClick ApplyNote: With Auto Execute selected, Patran will automatically execute the command - no need to click ApplyStep 4. Elements: Create / Mesh /