KERN PCB Precision Balance说明书用户手册.PDF

Laboratory PCB Precision Balance Standard Adjusting program (CAL): For quick setting of the balance’s accuracy. External adjusting weight required. Piece counting: Reference quantities selectable. Display can be switched from piece to weight. Data interface: The type of interface is shown by the pictogram. For a definition, see page 85. Net-total weighing: weight of tare cup and weight of components memorized in two separate stores. Percentage determination: Displays the deviation from the reference weight (100%) in % instead of grams. GLP/ISO record keeping of weighing data with date, time and ident.-no. Only with printers from KERN, see page 85. Weighing units: can be switched to e.g. non-metric units at the touch of a key. See balance model. Animal weighing program: strong vibrations are filtered out. Suspended weighing: load support with hook on the underside of the balance. Battery operation: The battery type is specified for each device. Mains adapter: 230 V/50Hz in standard version for Germany. On request GB, AUS or USA version. Option (additonal price) Rechargeable battery pack: rechargeable set. KERN – Your DKD-Calibration Partner