LEI EP-80R temperature sensor Manual说明书用户手册.PDF

Pub. 988-0154-442 EP-80R TH Electronic Thru-Hull Temp Sensor Installation and Configuration Instructions This document shows how to install an EP-80R TH thru-hull temp sen- ® sor and how to connect it to a NMEA 2000 network. It also provides instructions on how to configure your temp sensor with Lowrance digi- tal gauges (LMF-200 LMF-400) and display units. NMEA 2000 is the communication bus standard developed by the Na- tional Marine Electronics Association (NMEA) for use in boats. Lowrance has introduced a line of products that can communicate over a NMEA 2000 network (LowranceNet). All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi- fied or certification is pending. CAUTION: Installing LowranceNET NMEA 2000 devices is significantly different from installing earlier Lowrance components without NMEA 2000 features. You should read all of the installation in- structions before proceeding. Decide where you want to install all components before drilling any holes in your vessel. Some sonar or GPS units may require a software upgrade to display NMEA 2000 data correctly. For free software upgrades or additional information on the LowranceNet NMEA 2000® network system, visit our web site, . Red NMEA 2000 Thru-hull connector temp sensor module The EP-80R TH temperature sensor. 1 Some sonar or GPS units may require a software upgrade to display NMEA 2000 data correctly. For