solidplant3D规格生成器表格标题对应及说明.docxVIP

  • 112
  • 0
  • 约4.16千字
  • 约 4页
  • 2022-08-08 发布于广东
  • 举报

solidplant3D规格生成器表格标题对应及说明.docx

The column names and their description listed on below. ? ALT_P_MARK Alternate piece mark 备用件标记 BASE_DIA Diameter of base底座直径 BASE_LEN Length of base 底座长度 BASE_LEN Length of base底座长度 BASE_OD Diameter of base底座直径 BASE_THK Thickness of base length底座长度厚度 BASE_WEB Thickness of base diameter底座直径厚度 BOLT_D_X_L Bolt Diameter X Bolt length 螺栓直径X螺栓长度 BOLT_DIA Bolt diameter螺栓直径 BOLT_INC Bolt increment factor螺栓增量系数 BOLT_LEN Bolt length螺栓长度 BOLT_TYPE Bolt type螺栓类型 BOLT_UNITS Bolt units螺栓单元 BOLT_XCESS Reserved for future use保留供将来使用 BOWL_DEPTH Depth of the bowl or basket碗或篮筐的深度 BP1_END Cente

文档评论(0)

1亿VIP精品文档

相关文档