ANALOG DEVICES Interfacing NAND Flash Memory with ADSP-21161 SHARC Processors (Rev 1, 11 2005) 说明书用户手册.PDF

Engineer-to-Engineer Note EE-278 Technical notes on using Analog Devices DSPs, processors and development tools a Visit our Web resources /ee-notes and /processors or e-mail processor.support@ or processor.tools.support@ for technical support. Interfacing NAND Flash Memory with ADSP-21161 SHARC® Processors Contributed by Aseem Vasudev Prabhugaonkar Rev 1 – November 17, 2005 Introduction Functionally, the primary difference between NAND flash and NOR flash is that NAND flash NAND flash provides an alternative to hard is block accessible and NOR flash is byte drives, especially in portable and handheld accessible. systems. Cellular phones, personal digital assistants (PDAs), digital cameras, MP3 players, NAND flash has the advantage of short erasing and other mobile computing, communications, and programming times. The programming and consumer products use flash memory as their current into the floating gate is very small primary storage media. Applications that use because NAND flash uses Fowler-Nordheim NAND flash memory to store information such tunneling for erasing and programming. as images, data, and music require high density. Therefore, power consumption for programming