原创力文档- 1、本文档共80页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
Preface
This manual serves to explain the use of the CON 11/110 Conductivity/TDS
handheld meters. It functions as a handy reference step by step guide to help you
operate the meter. It is written to cover as many anticipated application of the CON
11/110 meters as possible. If there are doubts in the use of the meter, please do not
hesitate to contact the nearest Authorised Distributor.
Eutech Instruments / Oakton Instruments cannot accept any responsibility for
damage or malfunction of the meter caused by improper use of the instruments.
The information presented in this manual is subjected to change without notice as
improvements are made, and does represent a commitment on the part of Eutech
Instruments Pte Ltd / Oakton Instruments.
Copyright © 2003 All rights reserved.
Eutech Instruments Pte Ltd
Oakton Instruments
Rev 2 - 01/04
Table of Contents
1 INTRODUCTION 1
2 DISPLAY AND KEYPAD FUNCTIONS 2
2.1 DISPLAY 2
2.2 KEYPAD 3
3 PREPARATION 5
3.1 INSERTING THE BATTERIES 5
3.2 CONDUCTIVITY ELECTRODE INFORMATION 6
3.3 CONNECTING THE ELECTRODE TO THE METER 7
3.4 ATTACHING THE ELECTRODE HOLDER TO THE METER 8
3.4.1 Inserting the electrode into the electrode holder 8
3.5 CONNECTING THE AC/DC ADAPTER 9
3.6 CONNECTING THE RS232C CABLE (ONLY FOR CON 110) 9
3.6.1 RS232C Configuration 10
4 CALIBRATION 11
4.1 IMPORTANT INFORMATION ON METER CALIBRATION 11
4.2 PREPARING THE METER FOR CALIBRATION 12
4.3 TEMPERATURE CALIBRATION 13
4.4 SELECTION OF AUTOMATIC OR MANUAL CALIBRATION 14
4.5 AUTOMATIC CALIBRATION (FOR CONDUCTIVITY CALIBRATION ONLY) 15
4.6 MANUAL CALIBRATION (FOR
文档评论（0）