文本说明msc.patran courses课程.pptxVIP

;Problem Description This workshop introduces the concept of creating a split, or cut, in a ply to reduce the shearing that it might undergo while being draped on a mould. First, some of the geometry is created by importing an IGES file. Two groups are created, for the model, and for the dummy elements needed to drape across the hole. The surfaces are meshed. Material properties are created in MSC.Patran by reading a session file. Lamina/plies are created in MSC.Laminate Modeler for two material property sets. The materials are of type scissor or slide. Because the surfaces are highly curved