ZETEX - DESCRIPTION The ZXLB1600 inductive switching boost converter accepts an input voltage of between 1.6 说明书用户手册.PDF

ZXLB1600 LCD AND OLED BIAS BOOST CONVERTER - STN, CSTN SCREENS DESCRIPTION FEATURES The ZXLB1600 inductive switching boost converter • Wide input voltage range: 1.6 to 5.5V accepts an input voltage of between 1.6V and 5.5V and • Adjustable output voltage up to 28V, using PWM provides an adjustable output voltage of up to 28V for or analog control voltage LCD and OLED bias. The device contains an output • Internal PWM filter switch and a second switch to isolate the coil from the input to provide true isolation in shutdown mode. The • True shutdown (output isolated from input) output can be adjusted by means of an externally • Internal output switch and current sense applied dc voltage, a PWM control signal, or external • Low quiescent current: (75A max) feedback resistors and can supply typically 10mA of output current at maximum output voltage. Higher • 5A (max) shutdown current (including low battery comparator) current is available at lower output voltages. • Up to 500kHz switching frequency The input voltage range accepts a number of battery • High efficiency solutions, including dual dry cell and single Li-Ion cells • Small MSOP10 package and PFM operation mode allows the output to be regulated with high efficiency under light or no load • Low external component count conditions. The switching frequency range permits the use of miniature surface mount inductors. APPLICATIONS • PDAs A low b