华为Ethtrunk链路聚合及VLAN相关命令.pdfVIP

华为Eth-trunk链路聚合及 VLAN相关命令 [S2-Eth-Trunk1]interface Eth-Trunk1 [S2-Eth-Trunk1]bpdu enable [S2-Eth-Trunk1]mode lacp-static 然后将相应的端⼝加⼊到Eth-Trunk1接⼝，命令如下： [S1]interface g0/0/9 [S1]eth-trunk 1 [S1]quit S1]interface g0/0/10 [S1]eth-trunk 1 [S1]quit 端⼝原来是acces要改成Hybrid,要先打port default vlan 1命令，