EMERSON艾默生 Management of Change Guide Replacement of Fisher A-Body Control Valves with easy-e Control Valves说明书用户手册.pdf

Management of Change Guide September 2018 / D352308X012 ™ Replacement of Fisher Double-Ported A-Body Control Valves with Fisher easy-e™ Sliding-Stem Control Valves Table of Contents Management of Change 2 Background 2 Question Answer Checklist 3 A-Body and easy-e Control Valve Comparison 5 Capacities (Cv) by Size 5 Face-to-Face Dimensions 7 Shutoff Class 8 Trim Materials 8 Product Features 9 Approximate Control Valve Assembly Weights 9 Conclusion 10 Additional Resources 10 MOC: A-Body to easy-e Valves September 2018 / D352308X012 Management of Change Management of Change (MOC) is a procedure used to proactively manage changes that have the potential to impact safety or the process within a plant. Evaluating new techniques for improving MOC approval procedures can have an impact on plant efficiency. Historically, upgrading obsolete products or replacing existing process control equipment had been delayed or abandoned due to the extensive paperwork involved in completing a complex MOC approval sheet. Contained in the following sections are design comparisons between inactive Fisher double-ported A and AR control valves, and current Fisher easy-e ED and ET control valves. Fisher double-ported A and AR control valves will be referenced as “Fisher A-body” throughout this document; Fisher easy-e ED and ET control valves will be referenced as “Fisher easy-e.” These comparisons are inten