RockwellAutomation罗克韦尔Bul 1492 Field Wire Conv. Module for Modicon B805-016 or B853-016 to 1756-IA16用户手册说明书.pdf

Field Wire Conversion Module for Modicon B805-016 or B853-016 to 1756-IA16 (Cat 1492-CM800-LD003) Local language (French, Italian, German Spanish) versions of this document can be downloaded by going to . In the left margin click on Publications Library and Literature Library. In the Search Area (right margin), Search by Catalog Number and in the Search box type in the catalog number of the conversion system component. I. Module Description The 1492-CM800-LD003 conversion module provides field wire signal conversion from a Modicon® B805-016 or B853-016, 80 to 130Vac , 16-pt input module to a ControLogix 1756-IA16, 74 to 132Vac , 16-pt input module. The conversion module provides the mating connections to the B805-016 or B853-016 swing-arm (terminal block) with the attached field wires. It routes those signals via its 20-pin connector and a 1492-CABLEX pre-wired cable to compat- ible terminals of the 1756-IA16 (refer to the Wiring Diagram on pages 2 and 3). 20-pin connector for 1492-CABLEX Mating connector for B800 Terminal Block 1492-CM800-LD003 Conversion Module WARNING De-energize and lockout any and all power to all I/O field devices connected to the Modicon 800 I/O housing, and the power to the 800 I/O housing itself. Ensure all power is de-energized and locked out to any device in the control cabinet where the conversion is to be performed. Ensure work