RockwellAutomation罗克韦尔Safety Function Actuator Subsystems -- Stop Category 0 or Stop Category 1 via a用户手册说明书.pdf

Application Technique Safety Function: Actuator Subsystems – Stop Category 0 or Stop Category 1 via a Configurable Safety Relay and PowerFlex 527 Drive with Hardwired Safe Torque-off Products: Guardmaster 440C-CR30 Configurable Safety Relay, PowerFlex 527 Drive Safety Rating: CAT. 3, PLe to ISO 13849-1: 2008 Topic Page Important User Information 2 General Safety Information 3 Introduction 4 Safety Function Realization: Risk Assessment 5 Stop Safety Function 5 Safety Function Requirements 5 Functional Safety Description 6 Bill of Material 7 Setup and Wiring 7 Configuration 9 Calculation of the Performance Level 19 Verification and Validation Plan 21 Verification of the Configuration 24 Additional Resources 27 Safety Function: Actuator Subsystems – Stop Category 0 or Stop Category 1 via a Configurable Safety Relay and PowerFlex 527 Drive with Hardwired Safe Torque-off Important User Information Read this document and the documents listed in the additional resources section about installation, configuration, and opera