Danfoss丹佛斯Controller tray for refrigeration appliance controller with signal from external controller. AK-CT 200A + AK-CT 201A 用户指南.pdf

User guide Controller tray for refrigeration appliance controller with signal from external controller AK-CT 200A + AK-CT 201A ADAP-KOOL® Refrigeration control systems Introduction Application The controller is a complete auxiliary relay module with great flexibility for adaptation of signals from an external controller. The controller is optimised for connection of loads on refrigeration appliances and cold rooms, as well as for controlling the light and night blind. Advantages • Optimised for installation by manufacturer • Electricity-controlled and voltage controlled relay connections • Loads requiring electricity can be connected directly • One controller for several different refrigeration appliances • Quick set-up with predefined settings • Built-in data communication Principle There are 8 digital inputs, all of which can be defined to connect to the 8 outlet relays. The relays are controlled by an internal measurement circuit that ensures an optimum connection time on the sine curve. The optimum time allows connections to be made with loads of up to 16 A on individual relays. The current through each relay will be measured continuously, and if it becomes higher than the set permissible value, the relay will cut out and an alarm will be issued. Functions - Relays controlled by an external controller, e.g.: • Compressor and possibly compressor 2 • Defrosting with 1, 2 or 3 phases • Rail heat • Fans and fans in eco-operation • Light and possibly extra lighting • Night blind - AK-CT 200A has an alarm relay that is activated for alarms issued as the result of the cut-out of a relay due to excess current. Contents Introduction 2 Operation 14 Operation 4 Menu survey 15 Applications 6 Data 18 Connections 9 Ordering 19 Survey of functions 11 2 User Guide RS8GT502 © Danfoss 2016-10