ABB Data sheet - COND-SGA Conditioners – amplifier for strain gage based transducers 数据表(英语)说明书用户手册.pdf

— ABB MEASUREMENT ANALYTICS | DATA SHEET COND-SGA Conditioners – amplifier for strain gage based transducers 2 COND-SGA — Measurement made easy Conditioner – amplifier provides standardized signals in current and voltage from every load cell, force transducer and torque sensor based on the strain gage technology. — Input: Wheatstone bridge 0.1 to 30 mV/V — Output: 4(0) to 20 mA, –10 to 0 to +10 V — Power supply • COND-SGA-A: 115 to 230 V AC / 18 to 24 V DC • COND-SGA-D: 18 to 24 V DC — Enclosure: ABS case 164 × 84 × 57 mm (6.45 × 3.30 × 2.24 in) COND-SGA CONDITIONERS – AMPLIFIER FOR STRAIN GAGE BASED TRANSDUCERS | DS/COND-SGA-EN REV. A 3 Change from one to two columns — — Applications Functions The COND-SGA is perfectly designed to the following • Zero point and full scale by internal dip-switches and applications: potentiometers • Industrial weighing • With internal shunt calibration resistor of 120 kΩ • Industrial force and torque measurement • Direct connection to PLC, display unit, industrial instrumentation, chart recorder or PC (with A/D card) Ch