韩国现代santamo MPV汽车自动变速器维修手册.pptVIP

Chonan TSTC- KM(Kyoto Model)- Alpha, Beta seriesApplication vehicle :SLC, SantamoJ-1, Y-2,3X-2,3RD (Before 2000MY) 1 Identification number is stamped as 2 rows of 6 digits each as below on the transaxle case.Identification number ?? Product Serial No.1. Identification No. for α, β SeriesMODEL LINE UP T/A ID. NUMBER2 1. Identification No. for α, β SeriesMODEL LINE UP T/A ID. NUMBERNotation : - T/Con ; Torque converter3 2. Identification No. for KM SeriesMODEL LINE UP T/A ID. NUMBER4 2. Identification No. for KM SeriesNotation : - “D〞 in 5th. Digit ; Damper spring - *1 ; Domestic or export (except NAS) - *2 ;NAS - T/Con ; Torque converterMODEL LINE UP T/A ID. NUMBER5 GENERAL SPECIFICATIONS6 FiberFiber#1#2#3#4#5#6#7#8#9#10#11 #12 #13KM, α, β seriesTHRUST BEARING AND RACES7 THRUST BEARING AND RACES8 Notation :OD : Outer Diameter ◎ : Factory Assembly PartID : Inner Diameter S : Selective PartT : ThicknessTHRUST BEARING AND RACES9 Unit : kgf.mTORQUE SPECIFICATIONS10 TORQUE SPECIFICATIONSUnit : kgf.m11 TORQUE SPECIFICATIONSUnit : kgf.m12 SERVICE SPECIFICATIONS13 LUBRICANTSUnit : LiterSERVICE SPECIFICATIONS14 Damper clutchDifferentialTransfer shaftPG ‘B’Transfer driven gearTransfer drive gearEnd clutchTransfer idler gearPlanetary gearLow/Reverse brakeRear clutchPG ‘A’Kick-downbrakeTorque converterAdapterOil pumpFront clutchTRANSAXLE LAYOUT15 Notation : ☆ - Engine start possible ○ - Element engaged in each gear position □ - Parking mechanism △ - Pre-engaged elementELEMENTS IN USE AT EACH POSITION16 Select pattern refers to the indication of transaxle positions to be manually selected by the driver. This transaxle is provided with 6 positions : P-R-N-D-2-L. The following contains the explanations of the function of each position selected.P-Parking(1) Each element does not operate at all. Therefore, the engine output is not transmitted to the outp