ABB 3HNA028906-001 PRESSURE SENSOR 说明(英语)用户手册.pdf

2018-06-18 16:32 3HNA028906-001 PRESSURE SENSOR This PRESSURE SENSOR has been pre-adjusted to fit A1HPAirFuncVU. If the sensor shall be used for other functions, the sensor have to be adjusted according to below matrix. Function Set Point Channel Type A1MainAirSup 4.0 Bar B Error A1Bear * 7.9 Bar A Warning 7.0 Bar B Error A1Bear ** 5.9 Bar A Warning 5.0 Bar B Error A1HPAirFuncVU 7.9 Bar A Warning 7.5 Bar B Cr. Warning * For Applicators specified with 8 Bar Bearing Air ** For Applicators specified with 6 Bar Bearing Air Please make sure to use Loctite 543 on the threads, when tightening the sensor. 3HNA028906-001 PRESSURE SENSOR also replace 3HNA023666-001 PRESSURE SENSOR. Print out and deliver this document together with each PRESSURE SENSOR delivered as sparepart. Prepared Responsible department Description Test Instruction Johnny Boe ABB AS, RMRO NO Approved INSTRUCTION Page Jakob Trydal 1 Status ECO no No. of pages