900410讲义的课件知识.pptVIP

塑膠產品與模具設計 Plastic Part and Mold Design Charles Hsu OLE Technology Corp.;澆注系統設計 Filling System Design;模具設計的優先順序 Priorities of Mold Design;澆注系統設計的優先順序 Priorities of Filling System Design;豎澆道 Sprue;壁厚不均是注塑成形中最大的麻煩製造者。 這對薄壁零件尤然。 這些麻煩包括了遲滯現象、短射、凹陷、發赤、噴流、翹曲及長冷卻時間等；目前都可用CAE以直接或間接的方式預測。 Non-uniform wall thickness is the biggest trouble maker in plastic injection molding. This is especially true to thin-wall part. The troubles, including hesitation, short shot, sink mark, blush, jetting, warpage and long cooling time etc., can be predicted, directly or indirectly, by using CAE. ;壁厚設計 Wall Thickness