SpectraPro HRS-500光谱仪操作说明书 英文.pdfVIP

Princeton Instruments 15 Discovery Way • Acton, MA 01720 USA Operating Instructions HRS-500 500mm Triple Grating Imaging Spectrograph and Scanning Monochromator HRS-500 MANUAL - PRELIMINARY 1 Thank you for your purchase of the HRS-500 spectrograph and scanning monochromator and for selecting Princeton Instruments as your provider of precision spectroscopic equipment. PI strives to manufacture equipment of the highest quality and to design our monochromators and spectrographs for easy installation and operation. If you have any questions during set up or use of PI equipment, please do not hesitate to contact our experience technical staff. This instruction manual will assist you in set-up and operation of your new HRS-500 monochromator/spectrograph. Even if you are an experienced user of spectroscopic equipment, we suggest that you follow the manual (at least initially) to insure proper setup and operation. If you have any questions about the information contained in this manual, please feel free to contact the PI customer service department. The HRS-500 requires a single 9/64th Allen wrench for virtually all access, mounting of accessories and adjustments. PI provides the 9/64” wrench along with a 3/32nd box wrench (for removal of the exit diverter mirror shipping screw). What’s in the box? 1. HRS-500 spectrograph or monochromator 2. 6” USB cable 3. Memory stick with instruction manual, a complimentary copy of ResXtreme spectral deconvolution software add-in (spectrographs only) and the HRS-500 brochure 4. 9/64” Allen wrench 5. 3/32” “T” Allen wrench 6. Copy of MONOCHROMATOR CONTROL software on CD-ROM 7. If selected at time of purchase, IntelliCal wavelength and Intensity calibration system 2