SpectraPro HRS-750光谱仪说明书 英文.pdfVIP

Princeton Instruments 15 Discovery Way • Acton, MA 01720 USA Operating Instructions HRS-750 750mm Triple Grating Imaging Spectrograph and Scanning Monochromator 1 HRS-750 MANUAL - PRELIMINARY Thank you for your purchase of the HRS- 750 spectrograph and scanning monochromator and for selecting Princeton Instruments as your provider of precision spectroscopic equipment. PI strives to manufacture equipment of the highest quality and to design our monochromators and spectrographs for easy installation and operation. If you have any questions during set up or use of PI equipment, please do not hesitate to contact our experience technical staff. This instruction manual will assist you in set-up and operation of your new HRS-750 monochromator/spectrograph. Even if you are an experienced user of spectroscopic equipment, we suggest that you follow the manual (at least initially) to insure proper setup and operation. If you have any questions about the information contained in this manual, please feel free to contact the PI customer service department. The HRS-750 requires a single 9/64th Allen wrench for virtually all access, mounting of accessories and adjustments. PI provides the 9/64” wrench along with a 3/32nd box wrench (for removal of the exit diverter mirror shipping screw). What’s in the box? 1. HRS-750 spectrograph or monochromator 2. 6” USB cable 3. Memory stick with instruction manual, a complimentary copy of ResXtreme spectral deconvolution software add-in (spectrographs only) and the HRS-750 brochure 4. 9/64” Allen wrench 5. 3/32” “T” Allen wrench 6. Copy of MONOCHROMATOR CONTROL software on USB memory stick 7. If selected at time of purchase, IntelliCal wavelength and Intensity calibration system