光纤测量技术教学课件电子教案全套课件.pptx

OSA实验;目录;一、OSA的原理;;OSA structure;宽带光源的原理;ASE lasing source;二、OSA的主要用途;;;;;OSA的使用中的注意事项;可调谐激光器的使用注意事项;ASE光源使用注意事项;四、OSA实验;实验目的;实验内容;实验步骤;实验结果分析、作业内容;Reference;Precision Reflectometer;Overview; Typical applications include: Measurements of launch optics for lasers and opto-electronic integrated circuits Measurements of passive fiber optic devices such as couplers, attenuators, connectors, and isolators High-resolution measurements of lightwave path discontinuities based on a known refractive index Measurement of refractive index of material based on a known distance between two discontinuities High-resolution measurement of path length, expressed as a transmit time Measurements of bulk optic devices such as lenses, AR coating, and crystals;Operation principle;The HP 8504A precision reflectometer is based on the Michelson interferometer and uses the techniques of white light interferometry. A 1300nm or 1550nm low-coherence light source is sent to the a power splitter. One path leads to the DUT, while the other path leads to a reference mirror. Light reflected off both the reference mirror and the DUT is recombined and detected. If the path length from the source to the reflection in the DUT is the same as from the source to the mirror, a coherent interference signal appears at the detector. By moving the position of the reference mirror, the instrument can then scan the test device for reflections over a 400mm range(equivalent air distance);Measurement process;There are seven steps to performing a measurement Warm up the instrument Clear fiber ends and instrument test port Select operating wavelength Select reference extension Perform a calibration Connect the DUT Optimize the measurement;Warm-up the instrument The HP 8504A is capable of making measurements of extremely small reflections. Even very small spurious signals within the instrument can degrade dynamic range. To ensure maximum dynamic range and measurement stability, turn on the HP 8504A and allow it to