Schneider Electric施耐德NetBotz Door Switch Sensors for APC Racks (NBES0303) Installation Instructions安装和用户指南(英语).pdf

® ® NetBotz Door Switch Sensors for APC Racks (NBES0303) Installation Instructions Inventory Switch (2) Magnet (2) M3 hex nut (4) 4.57-m (15-ft) door switch sensor cable (2) 6-32 x 5/16-in screw (6) 63.5-mm (2.5-in) dual adhesive tape (4) 203-mm (8-in) tie wrap (10) Adhesive cable tie holder (5) RJ-45 coupling (1) Installation Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz products. See your NetBotz product documentation for details. Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the RJ-45 coupling and standard CAT-5 cabling. ®  Front Door of NetShelter SX Enclosure  Rear Door of NetShelter SX Enclosure Customer support and warranty information is available at the APC Web site, . 990-3375 05/2008 © 2008 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners. *990-3375*