Schneider Electric施耐德167LP Pneum. Buoyancy Transmitter with Torque Tube for Liquid Level, Interface and Density安装和用户指南(英语).pdf

Master lnstruction 12.09 MI EML011 0 A-(en) 167LP Pneumatic Buoyancy Transmitter with Torque Tube for Liquid Level, Interface and Density 1 GENERAL 2 INSTALLATION The pneumatic transmitter 167LP is used for measuring The pneumatic transmitter T67lP in sandwich construc- the Ievei, interface or density of liquids. Measurement tion , is built onto the vessel or the displacer chamber. is carried out in accordance with Archimeds buoyancy The transmitter can be used for ambient temperatures principle. ranging from -40 to +90 °C and, depending on the The transmitter converts the Iifting force of a displacer material, for temperatures of the measured medium ranging from -196 to +400°C. body to an analog, linearly arranged, pneumatic output signal in the unit range 0.2 to 1 bar, or 3 to 15 psi. Heat insulation ensures that no heat radiation reaches the housing of the transmitter at high temperatures of the measured medium. Life ls C)n Foxboro.. by Schneider Electric Repairs and maintenance must be carried out by qualified personell 2 167LP 12.99 MI EML0110 A-(en) MI EML0110 A-(en) 12.99 167LP 3 4 167LP 12.99 MI EML0110 A-(en) MI EML0110 A-(en) 12.99 167LP 5 6 167LP