guidelines-on-the-registration-of-pressure-vessels标准规范要求.pdfVIP

GUIDELINES FOR THE REGISTRATION OF PRESSURE VESSEL IN WORKPLACES BY AUTHORISED EXAMINER Occupational Safety and Health Division, Ministry of Manpower (Version 1.1 – Feb 2007) 1 CONTENT PAGE 1. INTRODUCTION3 2. PRESSURE VESSEL TYPE3 3. REGISTRATION PROCEDURE FOR NEW PRESSURE VESSELS 3 4. RE-REGISTRATION PROCEDURE FOR EXISTING PRESSURE VESSELS4 5. RESPONSIBILITIES OF AUTHORISED EXAMINER (PRESSURE VESSEL)4 6. RISK ASSESSMENT AND MANAGEMENT 4 APPENDIX 1 - GLOSSARY OF TERMS5 APPENDIX 2 – DOCUMENTS TO BE SUBMITTED TO AUTHORISED EXAMINER AND RETAINED BY OWNER6 APPENDIX 3 - PROCESS FLOW FOR REGISTRATION OF NEW PRESSURE VESSELS / RE- REGISTRATION OF EXISTING PRESSURE VESSELS 7 APPENDIX 4 – LIST OF REQUIRED TEST FOR NEW PRESSURE VESSEL REGISTRATION8 APPENDIX 5 – LIST OF REQUIRED TEST FOR EXISTING PRESSURE VESSEL RE- REGISTRATION 9 APPENDIX 6 – GAS TRAIN REQUIREMENTS FOR GAS OR DUAL-FIRED STEAM BOILER11 APPENDIX 7 - SCREENSHOTS FOR PRESSURE VESSEL REGISTRATION13 APPENDIX 8 – SAMPLES OF INSPECTION REPORTS ISSUED BY OVERSEAS INSPECTION AGENCIES19 2 GUIDELINES FOR THE REGISTRATION OF PRESSURE VESSELS IN WORKPLACES BY AUTHORISED EXAMINER 1. INTRODUCTION 1.1 With effect from Nov 2006, the owner of statutory pressure vessels will only need to approach an Authorised Examiner (Pressure Vessel) who will make an application to the Occupational Safety and Health Division (OSHD) to register for use the pressure vessels. 1.2 The owner will require to submit the required documents as specified in Appendix 2 to an A