ASME B107.300-2021 手动扭矩工具和扭矩测试仪.pdfVIP

ASME B107.300-2021 [Revision of ASME B107.300-2010 (R2016)] Hand Torque Tools and Torque Testers A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B107.300-2021 [Revision of ASME B107.300-2010 (R2016)] Hand Torque Tools and Torque Testers AN AMERICAN NATIONAL STANDARD Two Park Avenue • New York, NY • 10016 USA x Date of Issuance: August 31, 2021 This Standard will be revised when the Society approves the issuance of a new edition ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard Interpretations are publishedonthe Committeeweb pageand under/InterpsDatabase PeriodicallycertainactionsoftheASME B107 Committee may be published as Cases Cases are published on the ASME website under the B107 Committee Page at /B107committee as they are issued Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly publisheditems, orto correcttypographical orgrammatical errors incodes and standards Such errata shall be used on the date posted The B107 Committee Page can befound at /B107committee There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard This option can be found on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section ASME is the registered trademark of The American Society of Mechanical Engineers This code orstandardwas developed under procedures accreditedas meetingthe criteriafor American NationalStandards The Standards Committeethat approvedthe codeorstandardwas balancedto assurethat