ss8833e_v1.2驱动 电机芯片.pdfVIP

SS8833E Dual H-Bridge Motor Driver DESCRIPTION FEATURES The SS8833E is a dual bridge motor driver which has  Wide Power Supply Voltage Range: 2.7V to 16V two H-bridge drivers, and can drive two DC brush  Two Internal Full-Bridge Drivers motors, a bipolar stepper motor, solenoids, or other  Low Quiescent Current: 1.1mA inductive loads.  Low Sleep Current: 1μA It operates from 2.7V to 16V, and can deliver load  Thermal Shutdown and Under-Voltage Lockout current up to 1.0A per channel. The output driver block Protection of each H-bridge consists of P+N-channel power  Over Current Protection (OCP) MOSFETS configured as an H-bridge to drive the motor  Over-Temperature Output Flag windings. Each H-bridge includes circuitry to regulate or  Thermally-Enhanced Surface-Mount Package limit the winding current.  Low MOSFET On Resistance (HS: 650mΩ; LS: The internal safety features include sinking and 350 mΩ) sourcing current limits implemented with external sensors, under-voltage lockout, over current protection APPLICATIONS (OCP) and thermal shutdown. An over-temperature output flag is available to indicate thermal shutdown.  POS Printers The SS8833E is packaged in 16-pin, 5.0mm×6.4mm  Video Security Camera eTSSOP with an exposed thermal pad on the back.  Robotics  Battery Powe