ABB Emax DC - Specifications and requeriments ordering codes 指导原则(英语).pdf

Specifications and requeriments for ordering selection - V201212 Low voltage air circuit-breakers for direct current applications Emax DC 6. Protection Trip Unit (mark the selected trip unit with an X) 口 PR122/DC 口 PR123/DC PR122/DC - One polarity is protected (+) insulated network and network with one polarity earthed. PR123/DC - Both polarities are protected (+ and -): all networks. In order to select the right Emax DC its necessary to fulfi the next technical specification topic list: 7. Auxiliary power supply (24V DC) planned to be installed 1. Rated uninterrupted current (at 402C), Iu [A] by customer DYes D No 8. Connection configuration (front view). 2. Rated ultimate short-circuit breaking capacity, Icu [kA] Fulfill the blanks with the requested configuration. 3. Rated service voltage, Ue [V DC] 4. Type of network {mark the selected net with an X) 口 Insulated net 口 With negative polarity connected to Earth net 只: Bridge 本 王 Load 十 Positive polarity - : Negative polarity 中 : 上 fthe pole is not used， ， just in 3 poles versions 口 With mid point connected to earth net 上 | | 1 ] 9 口 IEC60947-2 Standard LL_ : 口 UL1066 Standard 5. 上 口 Fixed (F)，Te